Viking Electronics DLE-200B Telephone Line Simulator
 Avoid the Expense of Leased or Rented Phone Lines for Point-to-Point Communications
The DLE-200B Line Simulator produces two way communication between standard telecom products such as modems, fax machines, Key Systems, PABX’s and standard single line telephones.
The Line Simulator can also provide sales people with a cost effective, easy to use method of conducting on site demonstrations, eliminating the need to locate phone lines and disrupt the customer’s phone service.
The DLE-200B Line Simulator provides precise dial tone, DC talk battery and standard or distinctive ringing. The unit also provides a CPC break on hang up.
Applications
Dedicated point-to-point communications (ringdown circuits)
Programming PC based voice products
Connecting dictaphone equipment to Electronic Key Systems
Intersystem TIE line
Courtesy phones
Demonstrating telecom equipment at trade shows, meetings, etc.
Connecting modems together
Features
Compatible with fax machines and modem speeds up to 28.8 kbps
Precise dial tone
32VDC talk battery
Switch selectable ring cadence
Provides CPC breaks after hang-up on either port
Switch selectable audio attenuation
Provides 2 seconds of precise dial tone after off-hook
Provides ring back signal to calling device
One or two way ring down capability
Jumper selectable ring count
Specifications
Power: 120V AC/13.8V AC 1.25A, UL listed adapter provided
Dimensions: 120mm x 70mm x 35mm (4.75" x 2.75" x 1.38")
Shipping Weight: .72 kg (1.59 lbs)
Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
Ringer Output: 2.0 REN load
Loop Length: 4.2 km (2.6 mi) maximum - 24 AWG twisted pair
Maximum Data Speed: 28,800 bps
Connections: (2) RJ11 jacks |
