The E-1600A-20A-EWP ADA Compliant Emergency Phones are designed to provide quick and reliable handsfree communication over the public switched telephone network.

The E-1600A-20A-EWP meets ADA (Americans with Disabilities Act) requirements for elevator telephones, and can be programmed from any Touch Tone phone.

Enhanced Weather Protection:
EWP products feature weather-sealed trim pots and DIP switches, a special rubber microphone boot and a mylar speaker with a rubber gasket acting as a primary shield against water penetration. If required, face plate gaskets are provided to further eliminate water infiltration. All connections are hand soldered to eliminate corrosion, and the connections at the push button switch, microphone, and "Call Connected" LED are also hand sealed using a special non-corrosive electronics grade flexible silicone sealant. The entire circuit board is "potted" in a flexible urethane encapsulating material, leaving the weather sealed field-adjustable trim pots and DIP switches accessible for on-site programming. The flexible urethane sealant allows the circuit board and its components to expand and contract, while maintaining weather resistance. To protect the tip and ring connections, special connectors filled with anti-corrosive sealing gel are included.

The phones can dial up to 5 programmable emergency numbers as well as 2 central station number. In addition the E-1600-20A-EWP features an "Info" button that will allow users to dial up to 2 non-emergency numbers.

Upon being answered, the phones can be programmed to automatically deliver a digital announcement to identify the location of the emergency call and then initiate the call connected LED light. An alternative DTMF Touchtone code may also be delivered.

All programming parameters including phone numbers and location numbers are stored in non-volatile E2 memory. With the exception of the E-1600-BLT tower phone, all units are phone line powered, requiring no batteries or external power sources for operation.

Lastly, the E-1600A-20A-EWP can also be used with specific Central Station Monitoring equipment.

• Elevators
• Parking ramps
• ATM machines
• Area of refuge locations
• Lobbies
• Entryways
• Campus emergency stations
• Roadside emergency stations
• Stadiums
• Convention centers

• Non-volatile digital voice announcer with 10 seconds of voice memory
• Advanced call progress detection
• Can automatically light the "Call Connected" LED for the hearing impaired
• Handsfree operation
• Phone line powered
• Non-volatile E2 memory (no batteries required)
• Touch Tone or pulse dialing
• Dials up to 5 emergency numbers on busy or no answer
• Dials up to 2 non-emergency numbers on busy or no answer
• Transmits a unique location I.D. code
• Grade 2 Braille label for the visually impaired
• Hangs up on CPC, silence, busy signal, dial tone, time out or Touch Tone command
• Programmable to auto-answer on incoming calls
• Remotely programmable
• Extended temperature range (-15°F to 130°F)
• 5 different chassis or board only available
• Central Station Monitoring capability
• Separate central station voice speed dial number
• Optional PB-100 Polling System available

• Power: Telephone line powered (24 V DC/20 mA minimum).
• Dimensions: E-1600(45) -133 mm x 102 mm x 51 mm (5.25" x 4" x 2"), E-1600-02 - 330 mm x 267 mm x 51 mm (13" x 10.5" x 2"), E-1600-03 - 133 mm x 102 mm x 51 mm (5.25" x 4" x 2"), K-1600-EHF - 251 mm x 174 mm x 53 mm (9.875" x 6.86" x 2.1")
• Connections: RJ-11 modular jack.
• Mounting: E-1600(45) - surface mount, E-1600-02 - flush mount, E-1600-03 - surface mount, K-1600-EHF - recess mount in standard elevator phone box.
• Environmental: -26°C to 54° C (-15°F to 130° F) with 5% to 95% non-condensing humidity.
• Material: E-1600(45) - 16 gauge steel - red(yellow), E-1600-02 - 11 gauge stainless steel, E-1600-03 - 14 gauge stainless steel, K-1600-EHF - 16 gauge aluminum - red.