Viking Electronics K-1700-3-EWP Handsfree Speaker Phone Vandal Resistant with Enhanced Weather Protection
 The K-1700-3-EWP provides a tough and attractive handsfree phone for apartment and door entry applications.
The K-1700-3-EWP comes complete with a standard, flush mount, rough-in box. In addition, an optional weather resistant, surface mount box is available.
When the "Call" button is pressed, the K-1700-3-EWP returns dial tone. The keypad may then be used to dial any number. If no Touch Tone is entered within 8 seconds, CPC is detected or a fast or slow busy signal is detected, the K-1700-3-EWP will automatically disconnect. Alternatively, the K-1700-3-EWP may be disconnected by pressing the "Call" button again.
EWP products feature weather-sealed trim pots and DIP switches, a special rubber microphone boot and a mylar speaker with a rubber gasket acting as a primary shield against water penetration. If required, face plate gaskets are provided to further eliminate water infiltration. All connections are hand soldered to eliminate corrosion, and the connections at the push button switch, microphone, and "Call Connected" LED are also hand sealed using a special non-corrosive electronics grade flexible silicone sealant. The entire circuit board is "potted" in a flexible urethane encapsulating material, leaving the weather sealed field-adjustable trim pots and DIP switches accessible for on-site programming. The flexible urethane sealant allows the circuit board and its components to expand and contract, while maintaining weather resistance. To protect the tip and ring connections, special connectors filled with anti-corrosive sealing gel are included.
Applications
- Apartment or multi-tenant office entry when used with the K-1900-3 or C-3000
- Residential entry system when used with the C-2000
- Courtesy and customer assistance phone
- Automated teller (ATM’s) phone
Features
- Vandal Resistant Features: 14 louvered, stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal keypad and "Call" button
- Weather Resistant Features: faceplate gasket, sealed
- keypad, mylar speaker with rubber gasket and conformal coated circuit board
- Built-in electronic ringer
- Yellow "in use" indicator LED
- Volume adjustments for microphone, speaker and ringer
- Disconnects on busy, return to dial tone, CPC, silence time out and maximum call time out
- Selectable auto-answer feature
- Extended operating temperature range -26°C to 54°C (-15°F to 130°F)
- Optional EWP (Enhanced Weather Protection) available soon.
- Zinc plated steel rough-in box with (2) 3/4" conduit knockouts
- Optional surface mount box available (VE-6x7)
- Momentary or continuous Touch Tone output
- Made in the USA
- 1 Year Warranty
Specifications
- Power: Telephone line powered 20V DC/25mA minimum (28mA minimum with JP1 removed)
- Dimensions: Overall - 139.7mm x 165.1mm x 66mm (5.5" x 6.5" x
2.6") , Rough-in box - 114.3mm x 139.7mm x 63.5mm (4.5" x 5.5" x 2.5")
- Environmental: -26°C to 54°C (-15°F to 130°F) with 5% to 95% non- condensing humidity
- Speaker/Ringer Volume: approximately 70 db maximum @1m
- Connections: (1) RJ11 jack
- CPC Disconnect Time: 350ms minimum
|
