Viking Electronics LDB-1 Loop Detector Board with on board 12 Volt Regulator
Viking's LDB-1 provides a loop activated contact closure when used in series with telecom devices on analog phone lines. The LDB-1 will initiate a dry relay contact on any off-hook condition. Alternatively, add the optional PS-2 power supply to provide switched DC power.
The relay itself is phone line powered and does not need an external power supply. Because both TIP and RING currents flow through the relay, excellent line balance is maintained.
Applications
- A-Lead Control
- Line "In-Use" detector/indicator
Features
- Phone line powered
- Excellent line balance
- Optional PS-2 power supply for switched power
- Made in the USA
- 1 Year Warranty
Specifications
Dimensions: 47.6mm x 30.5mm (1.875" x 1.2")
Mounting: (2) #4 screws (not included) or foam tape (included)
Shipping Weight: .45 kg (1 lb.)
Added Loop Resistance: 40 ohms
Maximum Loop Current: 125 mA
Minimum Loop Current: 18 mA
Operating Temperature: 0° to 70°C (32° to 158° F)
Maximum Supply Voltage Input: 35 V DC
Maximum 12V Supply Current: 500 mA with PS-2
Longitudinal Balance: 63 dB minimum
Maximum Contact Voltage: 200 V DC
Maximum Contact Current: 500 mA
Maximum Contact Power: 10 W
Connections: 7 pin screw terminal block |
|
![](lib/wantphones/tableftblack.gif) |
Customer service lines at Want Phones are open 9am - 5pm Pacific (12noon - 8pm Eastern) -- Monday thru Friday Call us at 425-608-5290 to speak to a representative or us at [email protected] |
![](lib/wantphones/tabrightblack.gif) |
|
© copyright 1999 - 2004 Want Phones -- all rights reserved |
![](lib/wantphones/spacer.gif) |
|