Viking Electronics RC-2A DTMF Remote Controller with 1 Relay Closure
 The RC-2A Remote Controller provides remote relay operation from any standard Touch Tone telephone.
The controller is designed to be installed either locally or remotely. For local installations the RC-2A can be installed in series on any analog communications path, such as analog C.O. lines, analog PABX/KSU stations or Viking’s W-Series Doorboxes. and will passively monitor for Touch Tone commands.
For off-premise applications, the RC-2A will answer analog C.O. lines or PABX/KSU stations after a selectable ring delay. A field programmable access code can also be programmed to prevent unauthorized usage. The RC-2A will then allow remote relay operation.
Note: For applications where more than one relay closure is required, the RC-3 is available
Applications
Remote Control of:
High security building entry
Heating/cooling equipment
Pumps and fans
Security systems
Gates
Lighting
PABX/KSU reset
Features
- Programmable access code
- Normally open or normally closed relay
- Selectable relay closure times
- Selectable ring delay (1, 2, 6, or 15)
- Easy installation with modular jacks and screw terminals
- Automatic disconnect or return to secure mode after 60 seconds
- One year warranty
- Made in the USA.
Specifications
- Power: 120VAC / 12VDC 500mA UL listed adapter provided
- Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
- Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
- Relay Contact Ratings: .5A @ 125V AC/1A @ 30V DC
- Connections: (2) RJ-11 jacks and 3 pin screw terminal block
- New 2004 Version
|
