Viking Electronics RC-3 DTMF Remote Controller with 3 Relay Closures; Alarm Activated Dialer
 The RC-3 Remote Controller provides remote relay operation for up to 3 relays from any Touch Tone telephone.
The controller is designed to be installed either locally or remotely. For local installations the RC-3 can be installed in series on any communications path, such as Viking’s W-Series Doorboxes.
For off-premise applications, the RC-3 can be installed on a line shared by a key system, PABX, single line phone or on a dedicated line. The RC-3 will answer C.O. lines or analog PABX/KSU station ports and allow remote relay operation after programmable number of rings. A field programmable security code can also be programmed to prevent unauthorized usage.
Three RC-3's may be cascaded to provide up to 9 relay closures from a single line.
Note: For applications where only a single relay closure is required, the RC-2A is available
Applications
- Programmable security code
- Selectable relay time delays
- Non-volatile memory
- Switchable 12V DC talk battery
- Programmable ring delay
- Cascadeable to provide up to 9 relay closures
- Easy installation with modular jacks and screw terminals
- Normally open or normally closed relays
- Contact initiated pulse dialer
- One year warranty
Features
- Remote Control of...
- High security building entry
- Heating/cooling equipment
- Pumps and fans
- Security systems
- Gates
- Lighting
- PABX/KSU reset
Specifications
- Power: 120VAC / 13.8VAC 1.25A adapter provided
- Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
- Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
- Pulse Dialing Speed: 10 pps
- Talk Battery Output: 12V DC (15 V DC nominal)
- Connections: (2) RJ-11 jacks and 10 pin screw terminal block
- Relay contact ratings: 220 V AC/DC @ 1 amp
|
